Magnesium anodes are used for protecting buried pipelines and tanks, heat exchangers and chillers, large gate valves, evaporative condensers, hot water tanks, etc.
They are available in many shapes and sizes as well as either bare ingots or pre-packaged in cotton bags with chemical backfill.
The DERUI supply the standard H1alloys ASTM AZ63 the efficiency of the alloy it is 50-54%the capacity of them is 1100-1188 Ah/kg and produce an open circuit potential -1,50 to -1,60V (Copper/Copper Sulphate electrode)
DERUI also supply the High Potential alloy. The efficiency of this alloy is 50-58%, the capacity 1100-1280 Ah/kg and the open circuit potential -1,70 to -1,78V (Copper/Copper Sulphate electrode). The chemical composition of these alloys is listed to the following table:
Above parameters can adjusted as per project requirements
